export@tawajodindustrial.ae
Email address
00971542993266
Phone line
Business Centre,Sharjah Publishing City Free Zone, Sharjah
Visit us
Hill Side Washers
Hill Side washers are used primarily to distribute the load evenly in cross bracing applications. Diagonal tie rods or cable assemblies with welded eye bolts are frequently used to support wall columns and steel beams in metal building construction. The outer curved surface helps tighten a nut in different angles. Consequently, time taken for overall
Load Indicating Washers
Load indicating washers are used largely to develop correct tension when installing A490 or A325 structural bolts. Diameters: 1/2″ – 1-1/2″ Finish: Plain and mechanically galvanized Item: Load indicating washers for A325 only Inquiry Now
Clipped Hardened Washers
Clipped hardened washers are used where there are space limitations and only one side can be clipped. These washers provide a smooth bearing surface and are used at the bottom of the head of bolt / nut. The chemical, mechanical, and dimensional requirements with regards to hardened washers satisfy the ASTM specification F436. And, these
Hardened Beveled Washers
Hardened beveled washers satisfy the ASTM specification F436. These washers are generally meant for American Standard beams and channels in structural applications to compensate for lack of parallelism. Refer malleable beveled washers to use beveled washers that come with low carbon steel bolts. Diameters: 1/2″ – 1″ Finish: Plain and hot-dip galvanized Inquiry Now
Beveled Washers
Beveled washers find their usage in American Standard beams and channels in structural applications, particularly to compensate the lack of parallelism. Refer F436 beveled washers to use beveled washers that come with A325 and A490 structural bolts. Diameters: 1⁄2” – 1″ Finish: Plain and hot-dip galvanized Inquiry Now
Hardened Round Washers
The major use of washers is to provide a smooth bearing surface. Washers are generally used at the basal part of the head of a nut / bolt. The chemical, mechanical, and dimensional requirements with regards to hardened washers are covered under the ASTM specification F436. These washers are completely hardened / carburized to add
Rosette Washers
These are available in plain as well as galvanized finish. Rosette washers are decorative. They are oversized washers with an outside diameter of 6¼”. They also have a large bearing surface which is used largely on the exteriors of masonry or rather brick buildings as they not only provide structural reinforcement but prevent lateral bowing
Ogee Washers
Ogee washers are large cast iron washers used generally in dock and wood construction. The term Ogee refers to curved shape. These washers appear oversized and they have a comparatively larger bearing surface that is designed to check bolt heads & nuts from pulling into the timber. ASTM A48 covers Gray Iron Castings which includes
Square Plate Washers
Square plate washers are made of just low carbon steel. These washers have a larger surface area compared to round washers. Since they develop more friction when tightened against wood, these washers are normally used in seismic applications. They are mostly used in timber construction Inquiry Now
Round Plate Washers
Round plate washers are merely low carbon steel; these are outsized cut washers designed to provide a larger bearing surface when compared to the F844 standard flat washers. Diameters: 1/2″ – 1″ Finish: Plain and hot-dip galvanized Inquiry Now